• Home
• New Students
• Labs
• Printing
• Internet Connection
• Email
• Tutorials
• Downloads
• FAQs
• A to Z
• Wiki

• Connecting Securely 
• MAC capture 
  • Getting Released
  • MAC address Info
• Ethernet 
  • Setting up Ethernet
  • Connection Solutions
  • Half-Duplex
  • Jack Problem
  • Report a Problem with a Jack
• Wireless (Campus-wide) 
  • What is Wireless?
  • Disadvantages
  • Setting up Wireless
  • Locations
  • Report a Problem with Barnard College Wireless
• Secure Wireless (Dorms) 
  • About Residential Wireless
  • Setting up Secure Wireless
  • Locations
  • Wireless in a non-wireless hall
  • Report a Problem with Residential Wireless
• 110 
  • Setup Info
  • Troubleshooting
  • Glossary of Terms
  • Report a Problem with Roadrunner
• Cathedral Gardens 
  • Setup Info
  • Troubleshooting
  • Glossary of Terms
  • Report a Problem with Roadrunner

110 Connection Information

To set up Road Runner:

1. Connect the cable modem to a power supply using the power cord.
2. Connect the cable cord from the wall to the cable modem. This cord should screw on with a metal bolt.
3. Connect the linksys box to a power supply using the power cord.
4. Connect the blue Linksys cable to the cable modem. This cable should already be attached to the Linksys box.
5. Locate your computer's Ethernet card. This card may have been built into your computer or you may have inserted the card into an external slot. Connect your Ethernet cord to the Ethernet card.
6. Connect the other end of the cord to the Linksys box OR to a female-terminated patch cable connector. These connecting wires are attached to the walls of your residence. If you do use a patch cable connector, make sure that the other end of the connector is attached to the Linksys box.